Circuit-test PSC-6916, Руководство по эксплуатации

Страница: 15 / 32

15
9.2 Method B: Using two 0 – 5K Ohm variable resistors
Remote Socket Pin Assignment for variable resistor
PIN FUNCTIONS REMARKS
1 Internal DC +5V Resistor end
2 Voltage Adjust Variable part of resistor
3 Current Adjust Variable part of resistor
4 Ground Another resistor end
5 Output OFF Short to Ground
6 N.A.
7 N.A.
8 N.A.
CC current setting by remote control.
Short circuit the main output with
12AWG wire.
Adjust the CC current setting using the 0-5k Ohm variable resistor.
Output voltage setting by remote control
Check the output voltage range of the power supply by adjusting the 5Kohm
variable resistor.
Two variable resistors must be set up at the same time in order for the remote
control to be functional.