Circontrol Wallbox eNext Series, Руководство по установке

Страница: 7 / 36

03
This manual provides commissioning information about Wallbox eNext series, which
has been designed and tested to allow electric vehicle charging according to IEC
61851-1:2017.
This document has different sections such as step-by-step installation procedure and
technical data.
ELECTRICAL RISK
Necessary precautions shall be taken to prevent any electrical risk
while the operations are carried out within the unit.
Unit must be disconnected from any power source during
commissioning.
ATTENTION!
Indicates that damage to property can occur if appropriate
precautions are not taken.
(*) These compliances only apply to eNext Elite Model
So, hello!
THE FOLLOWING SYMBOLS ARE USED FOR IMPORTANT
SAFETY INFORMATION IN THIS DOCUMENT
• Complies with IEC 61851, Electric vehicle conductive charging
system (IEC 61851-1:2017 and IEC 61851-21-2:2018).
• Complies with IEC 62196, Plugs, socket-outlets, vehicle
couplers and vehicle inlets (IEC 62196-1 and IEC 62196-2).
• Directives: 2014/35/UE, LVD;2014/30/UE, EMC.
• RFID complies with ISO/IEC 14443A/B *
• Modem 4G complies with IEC 60950-1 and CE/RED *