E7 – Owner’s Manual
Page
20
2.7 Test Operation
Use the following instructions to test the full resistance range of the Elliptical for proper
operation.
1). Hold the handlebars to steady yourself while stepping into the pedals. Begin peddling.
2). Verify the LED display will illuminate.
3). Run through the full resistance range.
Press the
(Resistance level +)
button until the unit reaches its highest load.
Press the
(Resistance level -)
button until the unit reaches its lowest load.
4). Wait for the pedals come to a complete stop before dismounting the Elliptical. Hold the
handlebar steady while dismounting.
Resistance level
buttons
