MV U320-R, MV U320-RX_Ciprico Inc.
5-21
MediaVault U320-R, U320-RX User Manual
Operations
Slow Beeps
Five or less slower beeps indicates a bad or intermittent drive. The
number of beeps indicates which drive is having problems.
When operating in RAID 3 mode the MV U320-R or MV U320-RX is still
available for normal operation without performance degradation. The
beeps indicate that a drive is down and that the MV U320-R or MV U320-
RX is operating in a degraded RAID 3 state. If another drive fails you are in
danger of losing data.
Contact Ciprico Inc. technical support for further information.
Constant Solid Beep
This indicates that a drive is down in RAID 3. The Service indicator should
be on. One of the drive indicator LEDs should exhibit a slow blink (one
second on, one second off).
This drive needs to be serviced. See the “Drive Replacement” section in
Chapter 8,
Maintenance
, for instructions.
You might need to mute the alarm by momentarily pressing the Mode Set
button only once. Pressing the Mode Set button a second time will start
the rebuild process. (You would typically only do this after a replacement
drive module has been installed to replace a defective drive module).
TABLE 5-9.
Description of the Audible Alarms.
