Operations
MediaVault U320-R, U320-RX User Manual
5-12
MV U320-R, MV U320-RX_Ciprico Inc.
Unit Power-Up Sequence
Always power-up the MV U320-R or MV U320-RX before powering-up the
host computer.
IMPORTANT: Wait for the MV U320-R or MV U320-RX to completely
boot-up before powering-up the host computer.
The unit power-up sequence allows the disk drive modules, and the data
access/data transmission functions of the MV U320-R or MV U320-RX, to
be fully operational before the host computer is booted-up and “sees” the
MV U320-R or MV U320-RX activities.
LED Power-On Sequence
The front panel LEDs of the MV U320-R or MV U320-RX power-up in the
following sequence. Depending on the size
and type
of drive, some LEDs might
blink on momentarily, go off, then illuminate fully after a minute or so.
TABLE 5-6.
LED Power-On Sequence
1. Power LED.
2. RAID 3 LED flashes (it stays illuminated if the unit is in RAID 3).
3. The drive LEDs blink in sequence
, depending on the size and type of drive
.
4. The U320 LED or U160 LED illuminates if the host computer is powered-up and is Ultra320 or Ultra160.
NOTE: On a DPS/Leitch Velocity Q, the U160 LED illuminates only when the array is active.