CipherLab 9500PPC, Справочное руководство

Страница: 28 / 103

18
9500PPC Mobile Computer Reference Manual
1.5.2 AUDIO
The mobile computer is integrated with a mono speaker, a low power transducer type, used for
playing sounds applied to events in Windows and programs, as well as playing audio files such as
.WAV, .MP3 files. In addition, it can be programmed for status feedback.
PRESS FIRST, AND THEN
The volume of the speaker can be turned on and adjusted increasingly by the key combination:
[Func] + [6]. Keep pressing the key combination ([Func] first, and then [6]) until the volume is
increased to a desired level.
PRESS FIRST, AND THEN
The volume of the speaker can be turned on and adjusted decreasingly by the key combination:
[Func] + [7]. Keep pressing the key combination ([Func] first, and then [7]) until the volume is
decreased to a desired level.
1.5.3 VIBRATOR
The mobile computer is integrated with a vibrator, which is software programmable for feedback.
This can be helpful when working in noisy environments.
1.6 DATA CAPTURE
A wide variety of scan engines is available for delivering flexibility to meet different requirements.
Depending on the scan engine integrated (check the "Active Device" setting in ReaderConfig), the
mobile computer is capable of scanning barcodes of a number of symbologies that are enabled by
default. If you need to scan barcodes that are encoded in a different symbology, use the Reader
Configuration Utility to enable the symbology first.
Refer to Appendixes for details on scan engine settings.
Note: The mobile computer allows the co-existence of one integrated scan engine and the RFID
reader.
1.7 COMMUNICATIONS
1.7.1 USING THE CRADLE
The cradle is designed for charging and communications at the same time.
1) Place the cradle on a flat and clean surface.