CipherLab 9500PPC, Справочное руководство

Страница: 24 / 103

14
9500PPC Mobile Computer Reference Manual
Warning: It is suggested to turn on the keypad backlight while working in a dark area;
however, using backlight while on battery power will substantially reduce battery life.
1.3.2 ALPHA KEY
This alphanumeric keypad is set to numeric mode by default. The Alpha key serves as a toggle among
numeric, alpha (lower-case alphabetic), and ALPHA (upper-case alphabetic) input modes.
Note: It is not necessary to hold down the [Alpha] key.
The alpha icon will appear on the navigation bar in a sequence as shown below.
ALPHA KEY INPUT MODE RESULT
N/A Numbers
Press one time
Small letters
Press two times
Capital letters
Note: If you are using the software keypad via SIP, tap CAP (Caps Lock) to toggle between upper
case and lower case alphabetic modes.
1.3.3 FUNCTION KEY
The [Func] (function) key serves as a modifier key.
1) To enable this modifier key, press on the keypad.
A yellow icon of the letter "F" will appear on the navigation bar. This modifier key is hold down
as long as the icon is displayed.
2) Now press another key to get the value of key combination (say, press [1] to get the value of
F1). The icon will go off now.
3) To get the value of another key combination modified by the [Func] key, repeat the above steps.
4) To abort the key modification, press again, and the icon will go off.
Note: It is not necessary to hold down the [Func] key.