CipherLab 9400CE, Справочное руководство

Страница: 105 / 111

95
Appendix III 2D Scan Engine
UCC/EAN-128 Read UCC/EAN-128 barcodes with leading FNC1
character.
Enable
ISBT 128 Read ISBT 128 barcodes. Enable
Industrial 25 (= Discrete 25) Enable
Select Length
One or two fixed lengths
Range (1~55)
4~55
Interleaved 25 Enable
Convert to EAN-13 Convert a 14-character barcode into EAN-13 if the
following requirements are met:
The barcode must have a leading 0 and a valid EAN-13
check digit.
No
Verify Checksum Decide whether to verify the checksum. If desired, select
one of the algorithms below. If the checksum is incorrect,
the barcode will not be accepted.
No
USS algorithm
OPCC algorithm
No
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
"Verify Checksum" must be enabled so that the
checksum can be left out (= "Transmit Checksum"
disabled).
No
Select Length
One or two fixed lengths
Range (1~55)
4~55
Code 39 Enable
Convert to Code 32 Convert to Italian Pharmacode. No
Code 32 Prefix Prefix character "A" to Code 32 barcodes. No
Verify Checksum Decide whether to verify the checksum. If the checksum is
incorrect, the barcode will not be accepted. No
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
"Verify Checksum" must be enabled so that the
checksum can be left out (= "Transmit Checksum"
disabled).
No
Code 39 Full ASCII Code 39 Full ASCII includes all the alphanumeric and special
characters. Disable
Select Length
One or two fixed lengths
Range (1~55)
4~55
Trioptic Code 39 Disable