CipherLab 9400CE, Справочное руководство

Страница: 104 / 111

94
9400CE Mobile Computer Reference Manual
Discrete 25 (=Industrial 25) 8 characters of less
Interleaved 25 8 characters of less
Level 4 All barcodes must be successfully read three times before being decoded.
Security Level
Select a decode security level appropriate for the barcode
quality when reading delta barcodes such as Code 128,
Code 93, UPC/EAN.
Security Level 0 – This default setting allows the scan
engine to operate in its most aggressive state, providing
sufficient security in decoding most “in-spec” barcodes.
Security Level 1 – Select this option if misdecodes
occur. This level should eliminate most misdecodes.
Security Level 2 – Select this option if Security Level 1
fails to eliminate misdecodes.
Security Level 3 – Select this option if Security Level 2
also fails to eliminate misdecodes. However, selecting
this option impairs the decoding ability of the scan
engine. If this level of security is necessary, try to
improve the barcode quality.
Level 1
Decode Time-out Set the maximum time for decoding to continue during a
scan attempt.
5~99, in units of 0.1 second.
9.9 sec.
SYMBOLOGY SETTINGS TABLE
2D DESCRIPTION DEFAULT
Codabar Enable
CLSI Editing When applied, the CLSI editing strips the start/stop
characters and inserts a space after the first, fifth, and tenth
characters of a 14-character Codabar barcode.
The 14-character barcode length does not include
start/stop characters.
No
NOTIS Editing Decide whether to include the start/stop characters in the
data being transmitted.
NOTIS Editing is to strip the start/stop characters, i.e.
to disable "Transmit Start/Stop Characters".
No
Select Length
One or two fixed lengths
Range (1~55)
4~55
Code 128 ---
Code 128 Read standard Code 128 barcodes (=without leading FNC1
character). Enable