9
Out-of-range Scanning
When the radio connection is established between scanner and remote host
device, the scanner will transmit each scanned data right after scanning the
barcode. However, the default of the scanner is unable to scan any barcode
data when it loses the radio connection with the remote host device. If you
enable the out-of-range scanning function, the scanner is able to continue
scanning barcode data while it is out of radio coverage. All scanned data will
be temporarily stored into the memory buffer until radio link resumed.
Enable Out-of-range Scanning
Disable Out-of-range Scanning
◆
In case of the scanner is out of radio coverage, you will hear 4 beeps in
descending tone to indicate the radio connection lost. The scanner’s link
indicators will
blink blue 3 times per 2 seconds
. Once the scanner is back
to radio coverage, you will hear 4 beeps in ascending tone to indicate the
radio connection rebuilt and the scanner’s link indicators
blink blue once per
2.5 seconds
. At the same time, all the stored scanned data will be
transmitted automatically right after the radio link is resumed.
Presentation Scanning
The Presentation Scanning is designed for hand-free applications for user’s
convenience. If the “Presentation Scanning Auto-sense” function is enabled,
the scanner is capable of automatically switching to presentation mode as
soon as you place it onto the SmartStand or cradle.
Enable Auto-sense
Disable Auto-sense
◆
In presentation mode, you can select higher sensitivity level though the
setting of
Presentation Sensitivity
when using scanner in a dim ambient
lighting environment. For the setting of Presentation Sensitivity, please refer
to Programming Manual for details.
Power off the Scanner
By default, the scanner goes off if the scanner is not used during the
user-defined time-out duration. You also can power off the scanner by
scanning the “Power Off” command. If you want to activate the scanner,
please press the trigger key.
Power Off
