Cinetron HD-900, Руководство пользователя, Страница: 7 / 40

Precautions
On safety
- Do not expose this apparatus to water, outdoors or otherwise expose to the elements.
- To avoid hazardous electric shock or fire, do not remove any covers or screws other than those specified in this manual.
- Check that the operating voltage of your unit is identical with the voltage of your local power supply.
- Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by well-trained personnel before operating it further.
- Unplug the unit from the power outlet if it is not to be used for several days.
- To disconnect the cord, pull it out by the plug. Never pull the cord itself.
- The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.
- Do not look into the lens while the lamp is on.
- Do not place your hand or objects near the ventilation holes. The air coming out is hot.
On preventing internal heat build-up
After you turn off the power with the (on) switch, do not disconnect the unit from the power outlet while the cooling fan is still running.
Caution
The projector is equipped with two ventilation holes (intake and exhaust). Do not block or place anything near these holes, or internal heat build-up may occur,
causing picture degradation or damage to the projector.
In case of sudden power shut-down while the projector is in use, press the Power Switch to the “Off” position and wait for at least three minutes to turn on the
projector when power is back to normal.