Cinetron HD-900, Руководство пользователя, Страница: 12 / 40

1.4 Remote Control
Button Name Description
Light Press to illuminate the buttons on the remote control.
Standby
Indicate the standby mode when the projector is powering on or powering off and waits for the
cooling to be completed.
On Press to turn on the projector.
Video Press to switch your input source to video.
VGA Press to switch your input source to VGA.
S-Video Press to switch your input source to S-Video.
Component Press to switch your input source to component connector.
HDMI Press to switch your input source to equipment with HDMI connector.
Dynamic Press to switch to the dynamic color mode.
Standard Press to switch to the standard color mode.
Theater Press to switch to the theater color mode.
Memory 1, 2, 3 Press to settings saved in memory 1, 2, or 3.
Exit Press to leave current menu and go to the upper menu.
Menu Press to show the on-screen display menu for further adjustment.
VUY Z Press arrows to move to the right, left, up, or down in the on-screen display menu.
OK Press to select a menu item or enter the option for the menu item.
Aspect Press to select the aspect ratio of the projected image.
Blank Press to show an entire blue or black screen.
Zoom Used to enlarge or reduce the projected image.
IRIS Press to adjust the IRIS of the projected image.
Focus Press to adjust the focus of the projected image.
Notes : To make effective use of remote control, please use it facing the front or the rear of the projector at
an angle within 15 degrees of the projector’s IR remote control sensor.
Remote Control
15
°
15
°