Cimel CE318-T Скачать руководство пользователя страница 50

Страница: 50 / 91

CE318-T Photometer

User Operation Manual

Revision V4.10 October 2021

and the Satlink 2.

•

Password:

not used menu.

(

): The first time, the GPS may take up to 15 min to get the GPS information.

Coordinates are checked daily at 01:00 True Solar Time. The coordinates are
automatically updated if the photometer has been moved over one tenth of a degree
in longitude or/and latitude.

3.10.

INFO

This menu displays information about the instrument.

•

Software: current firmware version of the instrument.

•

Photometer: Instrument

type (TS9, TU9…)

•

Cpu: Version of the main CPU electronic board.

•

Connector: Version of the connector panel electronic board.

General description of the scenarios and their sequence

4.1.

Scenario description and sequencing

Scenarios may be launched either automatically via the scheduler or in manual mode
via the SCENARIO menu (see part 3.5).

OFF

: launch OFF scenario.

PARK

: Launch PARK scenario. The photometer optical head is going to park at the

nadir position.

GOSUN / GOMOON

: launch GOSUN / GOMOON scenario. The photometer is going

to theoretical position of the sun / moon.

TRACK SUN / TRACK MOON

: The track scenario consists in tracking the SUN /

MOON using the 4-quadrant sensor.

LTRACK SUN / LTRACK MOON

: The LTRACK scenario consists in tracking the SUN

/ MOON permanently. It also measures signal on both channels.

ORIGIN

: launch ORIGIN scenario. The photometer goes to its ORIGIN position which

is +7.5° on both azimuthal and polar axes compared to the PARK position.

SUN

: The SUN scenario consists in measuring the sun irradiance for all the

wavelengths. SUN gains are used. Measurements are done in the following order:

Содержание CE318-T




























































































Результаты поиска

Содержание CE318-T

Отзывы:

Бренды по названию

Популярные бренды

Cimel CE318-T, Руководство пользователя

Результаты поиска

Содержание CE318-T

Отзывы:

Бренды по названию

Популярные бренды