English
English
13
15
7
16
14
2
2
9
9
dt 2
dt 1
Programming the milk measures
Programming the coffee measures
Position a suitable container for the amount to be programmed under
the cappuccino system (
2
).
Press (and keep momentarily pressed) the milk dispensing push but-
ton (
9
). The indicator light of the pressed push button will remain ON
(not flashing).
When the amount of milk in the container reaches the required level,
release the push button (
9
).
“ Before programming the coffee dispensing push buttons fill
the filter holder with the correct serving of ground coffee.
Don’t use coffee grouts for programming servings. ”
Fit and tighten the filter holder (
7
) on the coffee dispenser unit, posi-
tioning the cup (or cups) under the nozzle (or nozzles) of the filter
holder (
7
).
Press (and keep momentarily pressed) the coffee dispensing push button
(
13, 14, 15
or
16
) corresponding to the required serving to be pro-
grammed.
The indicator light of the pressed push button will remain ON (not flash-
ing).
When the amount of coffee in the cup reaches the required level, re-
lease the coffee dispensing push button.
If necessary, repeat the above operations for the other coffee push
buttons.
!
1 - Alternately press the PROG button until the display shows:
2 - Press the button to program; the display will show:
The LEDs of the buttons to be
programed turn on.
To change, press “+” or “-”.
Dosage Programing
Press a Button
Selection 01
Water Dosage: 00
Using the PROG button:
1 - Alternately press the PROG button until the display shows:
2 - Press the Milk button; the display will show:
The LEDs of the buttons to be
programed turn on.
To change, press “+” or “-”.
Dosage Programing
Press a Button
Selection 01
Milk Dosage: 00
Using the PROG button:
