Cima BLITZ 45T, Инструкция по эксплуатации и техническому обслуживанию

Страница: 31 / 72

25
BLITZ 5-1996
IN CASE OF BREAKAGE:
1 - Stop the tractor and take the key out of the control panel.
2 - Shut the 2 valve of the “P8” distributor.
3 - Put the lever of the "P3" three-way valve in "C" position, i.e. filling.
4 - Shut the P5 pressure adjustment knob cock (turn clockwise).
5.3.
2
- E8 - Electric control unit
1 - Fix the fastening bracket onto the tractor in the driver’s reach.
2 - Insert the distributor’s bayonet support into the fastening bracket.
3 - Connect the W1 supply cable by inserting the plug into the tractor socket.
The W1 supply cable is supplied complete with electric socket, to be fitted to the tractors which have
none or to replace the existing one if it does not match with the plug.
4. Connect the T5 distribution hosing with the hydraulic circuit of the distribution device (head) fitted to the machine (follow
the instructions of the use and maintenance manual delivered by the manufacturer).
Position the W1 and W2 electric cables so as to protect them from damage during sprayng. If
possible, use appropriate fastening clamps.
ELECTRIC CON-
TROL UNIT
W2
E8
UMAP021
W1
TO THE SERVICE
SOCKET
FASTENING
BRACKET
TO THE ELECTRIC DISTRI-
BUTOR (E7)
UMAP094
COVER
ELECTRIC DISTRIBU-
TOR (E7)