Cima BLITZ 45T, Инструкция по эксплуатации и техническому обслуживанию

Страница: 28 / 72

22
BLITZ 5-1996
Longitudinal
axis
UMAT015
UMAT016
2. Loosen the chains of the 3-point arms.
3. Start the tractor and bring the 3-point arms to the height of the steering rudder pins.
4. Stop the tractor and take the key our of the control panel.
5. Fit pto shaft on the machine side, locking them with the release pins.
6. Fix the tractor top link to the steering rudder and lock it with pin and release pin.
7. Completely lift the parking stand.
8. Start the tractor and lift the atomizer until the two PTO's are at the same height.
9.
10. By means of the top link, set the axis of the 2 PTO's on the same plane.
11. Lock the 3-point by tichening the chains of the 3-point lift.
At the end of the operation the 2 PTO's must be positioned on the same plane.
5.2 PTO - SHAFT
Use drive joints with CE certificate.
Stop the tractor, take the key out of the control panel and make sure that nobody touches
the hydraulic controls of the 3-point lift.
Avoid operating or staying under the machine or on the surface which could be
affelted by a sudden lowering the machine.
The assembling, disassembling or possible works on the drive joint must be carried
out when the engine is stopped and the key is out of the tractor control panel.