DOC. N. CIMATICII
REV. 7
ED. 08.2021
4)
Remove the pallets as described in Chapter 6.6 which follows.
5)
Place the new pallet set as described in Chapter 6.6 which follows.
6)
The new knife set is positioned as follows:
-
Slowly lower the knife set into guides. It is imperative that the blade lays in the space
between two pallets. Damage to the knife or the pallets can happen if the knife sprocket
tooth does not mesh with the chain.
-
You can jog the machine at the lowest s
peed to make sure the knife doesn’t hit the plates
when it’s rotating forward and backward.
Also, make sure the knife bearings have sat well
on the blocks with the locating pin.
-
Tighten the set screw on both side of the new knife set bearings. (use 3mm hex socket key)
6.5 Replacing the Knife Blade:
1)
Follow all instructions on preparing the CiMatic II for service which can be found in Section 3.1
General Precautions above
2)
The knife has to be removed first as follows:
CAUTION:
Great care should be taken when handling the knives as
they are
extremely sharp
.
Handle knives with leather gloves or use similar
protection for the hands.
Содержание CiMatic II
Страница 2: ...DOC N CIMATICII REV 7 ED 08 2021...
