ciMa-Pak CiMatic II, Руководство оператора

Страница: 15 / 27

DOC. N. CIMATICII
REV. 7
ED. 08.2021
To change the pallet style (This should only be done by a factory trained operator) you need to follow
the steps below:
1) Stop the CiMatic.
2) Remove the cover (9-Fig.2) by unlatching 4 clasps on both sides of the cover.
3) Remove the knife set integrated with the current pallet style.
- Completely loosen the setscrews located on each knife bearing (use 3mm size hex key in
your toolbox) one setscrew per side.
6.4 Changing Pallet Styles:
- Pull knife module straight up as shown below (pull each side at the same time).
CAUTION:
Great care should be taken when handling the knives as
they are
extremely sharp .
Handle knives with leather gloves or use similar
protection for the hands.