CIGWELD 625730 Скачать руководство пользователя страница 9

 

HD Manual Arc Welders 

 9 

©2000 CIGWELD All rights reserved

 

2.  Subject to Clause 3. CIGWELD gives the following warranties to the Customer: 

Insofar as they are manufactured or imported by CIGWELD, goods will upon delivery be of merchantable 
quality and reasonably fit for the purpose for which they are supplied by CIGWELD. 

CIGWELD will repair or, at its option, replace those of the goods which, upon examination, are found by 
CIGWELD to be defective in workmanship and/or materials. 

CIGWELD reserves the right to request documented evidence of date of purchase. 

3.  The Warranty in Clause 2; 

Is conditional upon: 

The Customer notifying CIGWELD or our Accredited Distributor in writing of its claim within seven (7) 
days of becoming aware of the basis thereof, and at its own expense returning the goods which are the 
subject of the claim to CIGWELD or nominated Accredited Distributor/Accredited Service Agent. 

The goods being used in accordance with the Manufacturer's Operating Manuals, and under competent 
supervision. 

Does not apply to: 

Obsolete goods sold at auction, second-hand goods and prototype goods. 

Breakdown or malfunction caused by accident, misuse or normal wear and tear. 

Repairs or replacement made other than by CIGWELD or Accredited Service Agents, unless by prior 
arrangement with CIGWELD. 

Replacement parts or accessories which may affect product safety or performance and which are not 
manufactured, distributed or approved by CIGWELD. 

4.  CIGWELD declares that, to the extent permitted by law, it hereby limits its liability in respect of the supply 

of goods which are not of a kind ordinarily acquired for personal, domestic or household use or 
consumption to any one or more of the following (the choice of which shall be at the option of 
CIGWELD). 

The replacement of the goods or the supply of equivalent goods. 

The repair of goods. 

The payment of cost of replacing the goods or acquiring equivalent goods. 

The payment of the cost of having goods repaired. 

5.  Except as provided in Clauses 2 to 4 above, to the extent permitted by statute, CIGWELD hereby excludes 

all liability for any loss, damage, death or injury of any kind whatsoever occasioned to the Customer in 
respect of the supply of goods including direct, indirect, consequential or incidental loss, damage or injury 
of any kind. 

3.6  Warranty Schedule - January 2000 

These warranty periods relate to the warranty conditions in clause 2.  All warranty periods are from date of sale 
from the Accredited Distributor of the equipment. Notwithstanding the foregoing, in no event shall the warranty 
period extend more than the time stated plus one year from the date CIGWELD delivered the product to the 
Accredited Distributor.  Unless otherwise stated the warranty period includes parts and labour. 

CIGWELD reserves the right to request documented evidence of date of purchase. 

 

CIGWELD STICK (MMAW) PRODUCTS

 

 

Main Power Magnetics.................................................................................................................. 1 year 
Original Main Power Rectifiers, Control P.C. Boards .................................................................. 1 year 
All other circuits and components including, but not limited to, relays, switches, contactors, 
solenoids, fans, power switch semi-conductors ............................................................................

 
1 year 

Please note that the information detailed in this statement supersedes any prior published data produced by 
CIGWELD. 

Содержание 625730




































Отзывы: