CIAT Ereba He Series, Инструкция по эксплуатации

Страница: 23 / 96

EN-23
EREBA He
The plate heat exchanger can foul up quickly
at the initial unit start-up, as it complements
the filter function, and the unit operation will
be impaired (reduced water flow rate due to
increased pressure drop).
Units with hydraulic module are equipped
with a screen filter.
Do not introduce any significant static or
dynamic pressure into the heat exchange
circuit (with regard to the design operating
pressures).
The products that may be added for thermal
insulation of the containers during the
water piping connection procedure must be
chemically neutral in relation to the materials
and coatings to which they are applied. This
is also the case for the products originally
supplied by the manufacturer.
2.3.2 - General
For details on connection diameters, refer to §1.5.1 Physical data EREBA He.
Figure 6: Water connection on unit
Draining water pipe
Water outlet
Water inlet
2 - INSTALLATION OF UNIT