CIAT COMFORT LINE, Инструкция по эксплуатации

Страница: 29 / 32

- For the HEE Brushless motor, Size 6 (Fig.16):
- Hold the FMA securely.
- For each FMA, unscrew and remove the 2 lower
screws (e).
- For each FMA, unscrew but do not remove the 2
upper screws (f).
- Lower the 2 FMA and release them from the lock
holes.
To refit, perform the operation in reverse order.
- For the HEE Asynchronous motor, Size 6
(Fig.17):
- Unscrew and remove the 3 lower screws (g).
- Unscrew but do not remove the 3 upper screws
(h).
- Lower the FMA and release them from the lock
holes.
To refit, perform the operation in reverse order.
5.4 - Heat exchange coil
A clean coil is crucial to the efficiency of the unit. If
necessary, clean the coil with a vacuum cleaner, taking
care not to damage the fins.
If the coil must be disassembled on account of a leak:
Disconnect the electrical supply to the unit before
carrying out any work.
■ Removing the coil:
For size 0 (Fig.18):
Firstly, disconnect the coil.
- Undo the 4 screws on the hydraulic coil (a).
- Guide the hydraulic coil downwards (b).
For sizes 1 to 6, refer to the section "Removing the
condensate drain pans".
To refit, perform the operation in reverse order,
remembering to bleed the coil before refilling with water.
CIAT
's products carry the CE mark, demonstrating that
they may be sold throughout the European Union. This
mark is your assurance that
CIAT
's products are safe to
use.
5 - SERVICING AND MAINTENANCE
EN-29 COMFORT LINE TM