CIAT BOX ELEC Eco+, Руководство по управлению

Страница: 19 / 32

EN
2 - DESCRIPTION OF COMPONENTS
Master controller (code 7219774)
A single master controller can simultaneously control three HELIOTHERME 4000 units powered by three-phase FMAs and fitted
with a three-phase electric heater.
Fastening screws (x 4)
Control console
Digital display Specifications label
Buttons to scroll menus
and change parameters
Cable gland for four-wire RS485 bus for
communicating with and powering the
Eco + ELEC BOX slave unit
Room sensor (factory fitted)
15 m remote sensor (7207381)
To change from "USER" mode (restricted access) to "INSTALLER" mode (all settings), press
both arrows on menu scroll button for 5 seconds
If no button is pressed for 30 seconds, the display returns to the current operating mode (Off,
Comfort, Eco or Frost Protection) and the setpoint calculated for it..
To return to factory settings, hold the left menu scroll key and the + key before powering the
enclosure. The control display after this reset the message " CIAT " and the software version .
Slave box BOX ELEC Eco +:
• code 7218907 pour H4350 TE 9.6 kW TRI
• code 7218908 pour H4400 TE 18.9 kW TRI
• code 7218910 pour H4500 TE 28.8 kW TRI
• code 7218911 pour H4500 TE 43.2 kW TRI
This slave box should be located within 2 meters of the three-phase motor fan group present on the HELIOTHERME 4000 for
compliance with standards art.4-7-3 IT 246 and NF C 15-100
Proximity switch lockable for standards compliance
and IT 246 art.4-7-3 NF C 15-100
Fixing brackets x 4
(tucked inside the box slave BOX
ELEC Eco +)
Marked and sized for wiring connection with HELIOTHERMES ALL
ELECTRIC TRI with a length of 2 meters to ensure compliance with the
standards IT 246 art . 4-7-3 and NF C 15-100
EN-19 BOX ELEC Eco+