CIAT BOX ELEC Eco+, Руководство по управлению

Страница: 27 / 32

EN
10 - ERROR MESSAGE
■ Fan motor assembly
The overload protection on one of the three-phase fan motor assemblies (FMA) controlled by one of
the Eco+ ELEC BOX slave units is open, i.e. a motor fault has been detected.
The number displayed indicates the Eco+ ELEC BOX slave unit on which the fault occurred.
To restart the fan motor assembly(ies) on which the fault occurred, press and hold the left arrow button
on the master controller for 5 seconds:
5 seconds
■ Room sensor
A fault has been detected on the sensor (disconnected or short-circuit). The message "dEF SEnSo"
flashes on the display. The system is off; it will automatically restart once the problem has been solved.
■ Communication between the master controller and the Eco+ ELEC BOX slave unit
A communication fault between the master controller and a Eco+ ELEC BOX slave unit has been
detected (internal controller inoperative, disconnection, etc.).
The number displayed indicates the Eco+ ELEC BOX slave unit on which the fault occurred.
The HELIOTHERME 4000 unit controlled by the Eco+ ELEC BOX slave unit on which the fault occurred
is off. It will restart automatically once the problem as been solved.
■ Electric heater overheating
An overheating fault has been detected on an electric heater on a HELIOTHERME 4000 unit controlled
by a Eco+ ELEC BOX unit.
The number displayed indicates the Eco+ ELEC BOX slave unit on which the fault Electric heater
overheating py occurred.
The electric heater of the HELIOTHERME 4000 unit controlled by the Eco+ ELEC BOXslave unit on
which the fault occurred is shut off and the fan motor assembly is turned on.The heater will automatically
turn back on when there is no longer a risk of overheating.
EN-27 BOX ELEC Eco+