Ciara Astro PB60S, Руководство пользователя

Страница: 47 / 68

CIARA Astro PB60S
- 47 -
4.3.7 BIOS recovery
It is unlikely that anything will interrupt a BIOS update; however, if an interruption occurs, the BIOS could be damaged. The following
table lists the drives and media types that can and cannot be used for BIOS recovery. The BIOS recovery media does not need to be
made bootable.
Acceptable Drives/Media Types for BIOS Recovery
Media Type Can be used for BIOS recovery?
DVD-ROM drive connected to an USB port Yes
USB removable drive (a USB Flash Drive, for example) Yes
USB diskette drive (with a 1.44 MB diskette) No
USB hard disk drive No
4.3.8 Boot options
In the BIOS Setup program, the user can choose to boot from a USB optical drive, hard drive, USB drive, USB flash drive or the
network. The default setting is for the USB optical drive to be the first boot device, the hard drive second, and a removable drive
third (such as USB drive, USB flash or USB floppy drive) and the network last.
NOTE
Optical devices, USB devices and network will only appear in the boot menu if they are enabled.
4.3.8.1 USB optical drive boot
Booting from optical drive is supported in compliance to the El Torito bootable CD/DVD format specification. Under the Boot menu
in the BIOS Setup program, a USB optical drive is listed as a boot device. Boot devices are defined in priority order. Accordingly, if
there is no bootable CD or DVD in the optical drive, the system will attempt to boot from the next defined drive.
4.3.8.2 Network boot
The network can be selected as a boot device. This selection allows booting from the onboard LAN or a network add-in card with a
remote boot ROM installed. Pressing the <F8> key during POST will display the boot device menu, then choose "PXE IPv4 Intel (R)
Ethernet Connection ... " to force booting from the LAN. To use this key during POST with a user password set, the User Access Level
in the BIOS Setup program's Security menu must be set to Full Access and the boot to Network option in the BIOS Setup program
’s
Boot menu must be enabled.
4.3.8.3 Booting without attached devices
For use in embedded applications, the BIOS has been designed so that after passing the POST, the operating system loader is invoked
even if the following devices are not present:
• Video adapter
• Keyboard
• Mouse