Ciara Astro PB60S, Руководство пользователя

Страница: 20 / 68

CIARA Astro PB60S
- 20 -
1.5.3 Solving audio problems
Solving audio problems
Problem
Cause Solution
Sound does not come out of the
speaker or headphones. Software volume control is
turned down. Double-click the Speaker icon on the taskbar,
and then make sure that Mute is not selected
and use the volume slider to adjust the volume.
The external speakers are not
turned on. Turn on the external speakers.
External speakers plugged into
the wrong audio jack. Only one of the two audio ports is reserved for
speakers.
Micro PC is in Last State mode. Press the power button to resume from Last
State mode.
CAUTION : When attempting to resume from Last State mode, do not hold down the power button for more than four
seconds. Otherwise, the micro PC will shut down and you will lose your data.
Sound cuts in and out.
Processor resources are being
used by other open applications. Shut down all open processor-intensive
applications.
Micro PC appears to be locked up
while recording audio. The hard disk may be full. Before recording, make sure there is enough
free space on the hard disk. You can also try
recording the audio file in a compressed
format.
1.5.4 Solving printer problems
Printer will not print.
Printer is not turned on and
online. Turn the printer on and make sure it is online.
The correct printer drivers for the
application are not installed. Install the correct printer driver for the
application.
If you are on a network, you may
not have made the connection to
the printer. Make the proper network connections to the
printer.
Printer may have failed. Run printer self-test.
Printer will not turn on. The cables may not be connected
properly. Reconnect all cables and check the power cord
and electrical outlet.
Printer prints g arbled
information.
The correct printer driver for the
application is not installed. Install the correct printer driver for the
application.
The cables may not be
connected properly. Reconnect all cables.
Printer memory may be
overloaded. Reset the printer by turning it off for one
minute and then turn it back on.
Printer is offline. The printer may be out of paper. Check the paper tray and refill it if it is empty.
Select online.