Chziri ZVF300H, Руководство пользователя

Страница: 129 / 219

Chapter 6 Detailed function description
-124-
F6 Group-Output terminals
F6.00 Y1 output selection
Setting range:0
～
15 Factory setting: 1
F6.01 Y2 output selection
Setting range:0
～
15 Factory setting: 2
F6.02 Relay output selection
Setting range:0
～
16 Factory setting: 3
This group parameters defines the content represented by the open collector
output terminals Y1, Y2, and relay.
0
：
No output
1
：
Forward running : Inverter runs forward.has output frequency .Output ON
signal at this time .
2
：
Reverse tunning : Inverter runs reverse.has output frequency .Output ON
signal at this time .
3
：
Fault output : ON: inverter is in fault state .
4
：
Frequency level detection FDT arrival: Please refer to functional code
F8.13.F8.14 for detailed description.
5
：
frequency reached Please refer to description of P8.15.
6
：
Zero speed running ON: The running frequency of inverter is Zero.
7
：
Upper limit frequency reached ON: Running frequency reaches the value
of upper limit frequency.
8
：
Lower frequency limit reached ON: Running frequency reaches to the
value of lower limit frequency .