Chziri ZVF300H, Руководство пользователя

Страница: 94 / 219

F0.04 Maximum output frequency .
Setting Range:10.00
～
600.00Hz Factory Setting:50.00 Hz
Chapter 6 Detailed function description
-89-
5 PID control setting 12.Common PID control setting
The inverter mode is PID control when this parameter is selected .It’s necessary
to set F9 group “PID control group”. The inverter running frequency is the frequency
value after PIF control . and PID given source, Feedback source and so on, Please
refer to F9 Group “PID function” introduction .
6: Remote communication setting
The running frequency is set by RS485 communication port .
7: External pulse setting
The running frequency is set by terminal X8 input pulse signal .For more details .
Please refer to F5.21~F5.25
。
8: AVI(host )±ACI(assit )setting
9: Keyboard(host) ±ACI(assit )setting
10: Communication (host) ±ACI(assit )setting
AVI
、
keyboard
、
commicanition are the main frequency input . linear plus the
main frequency when the analog ACI is the centre value and above, linear minus the
main frequency when the analog ACI is the centre value and below . when the main
frequency is o .and the output frequency is 0.
11: Combination Setting
The running frequency is set by combination. The combination mode confirmed
by F0.15-F0.16.
:
When the frequency given mode is selected to
7.should to use terminal X8.Other terminal is invalid.