Chuphotic Venus Smart 1K, Руководство пользователя

Страница: 14 / 21

12
Problem
LED display Alarm
Possible cause Solution
The 10# battery
LED is blinks
Beep once
every second
The charger of the
UPS is defective
Please contact the distributor
or Service center.
The 7# The bypass
indicator light
-
The Load more
than power out
of UPS or UPS
internal fault
Re duce the load, please contact the
distributor or service center
-
The 9# The in-
verter indicator off
UPS off or UPS
internal fault
Turn on switch "ON" UPS, please
contact the distributor or service center
The 8# utility
power LED
blinks in
normal mode
-
Maybe reversed
polarity (L, N)
of site wiring or
disconnect
with ground, or the
voltage between
neutral wiring to
protective ground
is to high
Please check the polarity of the neutral
wiring and the line wiring, ensure that The
green/yellow wire connect protective
ground properly, or make sure the voltage
between neutral wiring to protective
ground is less than 36VAC.
Table 6-1 UPS troubleshooting of LED panel indicator
6. Troubleshooting
In the event of an UPS fault, shoot the trouble according to Table 6-1, Table 6-2 and 6-3. If the fault still
persists, please contact our customer service center.