Chungho Super Iguassu ice, Руководство пользователя

Страница: 11 / 24

11
5 5.. IIn nsstta alllla attiio on n M Me etth ho od d
Connect tubing hose into the removed water(brine) and drained water connec-
tion part on the rear side of product and then connect tubing hose into the
drainage hole in sink, bathroom, or multi-purpose room, etc.
※ Install the removed water(brine) line and drained water line separately.
If drainage does not function properly due to improper installation, then water
may flow back toward waterspout and cause an overflow.
4
Adjust the tubing hose so that the discharged water(brine) and tap water tubing
hose so that they do not splash into surrounding areas.
5
Open the tap water valve supplied into each household, and place the water
source adaptor to the open position.
6
For stabilization of the cooling system and for safe use of this product, insert the
power plug into an AC 110V/60Hz, 220V/50Hz, 240V/50Hz, and 220V/60Hz
power outlet after 30 minutes after the installation of the product.
※ This product is for AC 110V/60Hz, 220V/50Hz, 240V/50Hz, and 220V/60Hz only.
8
Check whether water is supplied into the inside of product and whether there is
any leakage in or around the tubing connections.
9
Check to see if water is leaking at each connection part.
7
Check whether water is coming out by pressing the water dispensing button 1
hour after purification has begun.
10
Use after water has flowed into the storage tanks. 11
Install the product on a level surface.(Change product level using the product leg
adjustment and confirm the level surface a level.)
1
Close off the water supply valve as supplied to each household. Then temporari-
ly remove the connector part as provided from your given water source. Then
connect the main water line adaptor.
※ If the sealing O-ring at the connection piece is removed or damaged, it can
lead to leakage.
2
Connect tubing hose into water source adaptor and then attach to the water
inlet on the rear side of product.
3