Chungho Super Iguassu ice, Руководство пользователя

Страница: 7 / 24

7
SUPER IGUASSU ICE SUPER IGUASSU ICE
2. Safety Precaution
This product is for AC
110V/60Hz, 220V/50Hz,
240V/50Hz, and 220V/60Hz
only. After installation,
arrange the power cord so
that it will not be stepped
on or stepped over.
If dust, water, etc. finds its
way onto the power plug,
wipe it off well.
(There is danger of electric
shock or fire.)
Do not remove the power
cord by pulling it out of the
wall. Always remove it by
grasping the power plug.
(Damage to the power cord
can cause danger of electric
shock or fire.)
Do not install the product
in or around largely damp
areas, at a place near
flammable materials, or
at a place exposed to rain
or snow.
(There is danger of electric
shock or fire.)
Do not put any covering,
etc. on the rear and side of
product. Blocking ventilation
holes may raise inside
temperatures allowing for
system malfunction or even
system stoppage.
Fix hoses so that the brine water or the water discharged from the drainage hose may not splash into
surrounding areas.
1. During use of product, a murmuring water-flow sound, a rattling ice dropping sound, etc.
may occur some times during cold water production process or ice production process.
2. Opaque ice may occasionally be dispensed, but there is no abnormality in product performance
or ice quality.
3. TDSs(Total Dissolved Solids) found in ambient water, cold water, and ice may vary from one
another. (This is a phenomenon occurs because the ice is created by way of the freezing point
method.)
4. After the system power source is interrupted and then again restarted, irregular ice cube
sizes may temporarily occur.
Common Issues
(Symptoms from NORMAL operation of the system.)