Chungho IGUASSU ICE, Техническое руководство

Страница: 17 / 58

9
Installation
1
2
3
4
5
6
7
8
9
10
11
Install the product on a level surface. (Change product level using the product
leg adjustment and confirm the level surface a level.)
Close off the water supply valve as supplied to each household. Then tempo-
rarily remove the connector part as provided from your given water source.
Then connect the main water line adaptor.
If the sealing O-ring at the connection piece is removed or damaged, it can lead to
leakage.
Connect tubing hose into water source adaptor and then attach to the water
inlet on the rear side of product.
If tubing hose in blocked, water does not flow smoothly and may cause malfunc-
tion of the product.
Connect tubing hose into the removed water(brine) and drained water con-
nection part on the rear side of product and then connect tubing hose into the
drainage hole in sink, bathroom, or multi-purpose room, etc.
Install the removed water(brine) line and drained water line separately. If drainage
dose not function properly due to improper installation, then water may flow back
toward waterspout and cause an overflow.
Adjust the tubing hose so that the discharged water(brine) and tap water tub-
ing hose so that they do not splash into surrounding areas.
Open the tap water valve supplied into each household, and place the water
source adaptor to the open position.
Check to see if water is leaking at each connection part.
For stabilization of the cooling system and for safe use of this product, insert
the power plug into an AC 110V60Hz, 220V50Hz, 240V/50Hz and 220V/60Hz
power outlet after 30 minutes after the installation of the product.
Check whether water is supplied into the inside of product and whether there
is any leakage in or around the tubing connections.
Check whether water is coming out by pressing the water dispensing button 1
hour after purification has begun.
Use after water has flowed into the storage tanks.
9
17