Chrysler Voyager 2001, Руководство по эксплуатации

Страница: 49 / 168

To Unlink A Transmitter, Follow These Steps:
1. Turn the ignition switch to the ON position.
2. Press and release memory button number “1”.
3. Press and release the SET “S” button located
on the driver’s door. A chime will sound telling you
that you are in the set memory mode. You have
five seconds after the chime to complete the next
step.
4. Press and release memory button “1”.
5. Within 5 seconds, press and release the UN-
LOCK button on the remote keyless entry trans-
mitters. A chime will sound signaling you that the
transmitter has been successfully unlinked.
To unlink another transmitter from memory posi-
tions “1” or “2” repeat steps 1 through 5 for each
transmitter.
Middle Quad Fold & Tumble™ Seating
The passenger’s and driver’s side middle bucket
seats can be tilted forward for easy access to the
third seat or rear cargo area.
To tilt the seat, pull up on the release handle and
tilt the seat fully forward. To return the seat, lower
the seat and ensure that it is latched.
WARNING!
In the event of a collision you could be injured if
the seat is not fully latched.
Middle Quad Fold & Tumble™ Seat
Removal
1. Remove any obstructions from the floor in front
of the seat.
2. Ensure that the cupholder is closed.
3. Remove the head restraint and place it on the
seat cushion.
4. Pull up on the seatback release lever located
on the outboard side of the seat to fold the
seatback and lock it down.
5. Pull up on the release handle and tumble the
seat fully forward.
48