Chrysler PACIFICA HYBRID 2019 Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 244

Chrysler PACIFICA HYBRID 2019 Скачать руководство пользователя страница 75

Power Inverter — If Equipped

There is a 115 Volt, 150 Watt Power Inverter outlet
located on the right side of the vehicle, before the
third row of seats to convert DC current to AC
current. The Power Inverter can power cellular
phones, electronics and other low power devices
requiring up to 150 Watts. Certain high-end video
game consoles will exceed this power limit, as will
most power tools.

The Power Inverter turns on when the device is
plugged in, and the ignition is in RUN mode. It turns
off when the device is unplugged or the ignition is
no longer in RUN mode.

The Power Inverter is designed with built-in over-
load protection. If the power rating of 150 Watts is
exceeded, the Power Inverter shuts down. Once the
electrical device has been removed from the Power
Inverter, it resets. To avoid overloading the circuit,
check the power ratings on electrical devices prior
to using the Power Inverter.

WARNING!

To avoid serious injury or death:
•

Do not insert any objects into the
receptacles.

•

Do not touch with wet hands.

•

Close the lid when not in use.

•

If this outlet is mishandled, it may cause an
electric shock and failure.

Power Inverter

73

«
...
73
74
75
76
77
...
»

Содержание PACIFICA HYBRID 2019





















































































































































































































































Отзывы:

Нет отзывов