Chrysler PACIFICA HYBRID 2019, Руководство пользователя, Страница: 38 / 244

Programming The Memory Feature
To create a new memory profile, perform the fol-
lowing:
1. Cycle the vehicle’s ignition to the ON/RUN po-
sition (do not start the engine).
2. Adjust all memory profile settings to desired
preferences (i.e., driver’s seat, outside mirrors
and radio station presets).
3. Push and release the set (S) button on the
memory switch.
4. Within five seconds, push and release either of
the memory buttons (1) or (2). The instrument
cluster display will show which memory position
has been set.
NOTE:
• Memory profiles can be set without the vehicle in
PARK, but the vehicle must be in PARK to recall a
memory profile.
• To set a memory profile to your key fob, refer to
“Linking And Unlinking The Remote Keyless En-
try Key Fob To Memory” in this section.
Linking And Unlinking The Remote Keyless
Entry Key Fob To Memory
Your key fob can be programmed to recall one of
two pre-programmed memory profiles by pushing
the unlock button on the key fob.
NOTE:
Before programming your key fob you must select
the “Personal Settings Linked to Key Fob” feature
through the Uconnect Settings. Refer to “Uconnect
Settings” in “Multimedia” in your Owner’s Manual
for further information.
To program your key fob, perform the following:
1. Cycle the vehicle’s ignition to the OFF position.
2. Select a desired memory profile 1 or 2.
NOTE:
If a memory profile has not already been set,
refer to "Programming The Memory Feature"
in this section for instructions on how to set a
memory profile.
3. Once the profile has been recalled, push and
release the set (S) button on the memory switch.
4. Push and release button (1) or (2) accordingly.
“Memory Profile Set” (1 or 2) will display in the
instrument cluster.
5. Push and release the lock button on the key fob
within 10 seconds.
NOTE:
Your key fob can be unlinked to your memory set-
tings by pushing the set (S) button, and within
10 seconds, followed by pushing the unlock button
on the key fob.
Memory Position Recall
NOTE:
The vehicle speed must be less than or equal to
5 mph (8 km/h) to recall memory positions. If a
recall is attempted when the vehicle speed is greater
than 5 mph (8 km/h), a message will be displayed in
the instrument cluster display.
To recall the memory settings for driver one, push
memory button (1) on the driver's door or the un-
lock button on the key fob linked to memory posi-
tion 1.
To recall the memory setting for driver two, push
memory button (2) on the driver's door or the
unlock button on the key fob linked to memory
position 2.
GETTING
T
O
KNO
W
Y
OUR
VEHICLE
36