Chrysler PACIFICA HYBRID 2019 Скачать руководство пользователя страница 147 | Manualshive

Страница: 147 / 244

Chrysler PACIFICA HYBRID 2019 Скачать руководство пользователя страница 147

WARNING!

• It is dangerous to shift out of PARK or NEU-

TRAL if your foot is not firmly pressing the
brake pedal. The vehicle could accelerate
quickly forward or in reverse. You could lose
control of the vehicle and hit someone or
something. Only shift into gear when your
foot is firmly pressing the brake pedal.

• Unintended movement of a vehicle could in-

jure those in or near the vehicle. As with all
vehicles, you should never exit a vehicle while
the engine is running or the propulsion system
is active. Before exiting a vehicle, always come
to a complete stop, then apply the park brake,
shift the transmission into PARK, and turn the
ignition OFF. When the ignition is in the OFF
mode, the transmission is locked in PARK,
securing the vehicle against unwanted move-
ment.

• When leaving the vehicle, always make sure

the ignition is in the OFF mode, remove the
key fob from the vehicle, and lock the vehicle.

• Never leave children alone in a vehicle, or with

access to an unlocked vehicle. Allowing chil-
dren to be in a vehicle unattended is danger-
ous for a number of reasons. A child or others

WARNING!

could be seriously or fatally injured. Children
should be warned not to touch the park brake,
brake pedal or the transmission gear selector.

• Do not leave the key fob in or near the vehicle

(or in a location accessible to children), and do
not leave the ignition in the ACC or ON/
RUN mode. A child could operate power win-
dows, other controls, or move the vehicle.

CAUTION!

Damage to the transmission may occur if the
following precautions are not observed:
• Shift into or out of PARK or REVERSE only

after the vehicle has come to a complete stop.

• Before shifting into any gear, make sure your

foot is firmly pressing the brake pedal with the
exception of shifting between Drive and Low.
Shifting between Drive and Low can occur
without any brake application.

NOTE:

You must press and hold the brake pedal while
shifting out of PARK.

Hybrid Transmission

The transmission is controlled using a rotary elec-
tronic gear selector located on the center console.
The transmission gear range (PRNDL) is displayed
both above the gear selector and in the instrument
cluster display.

To select a gear range, simply rotate the gear selec-
tor.

Transmission Gear Selector

145

«
...
145
146
147
148
149
...
»

Содержание PACIFICA HYBRID 2019





















































































































































































































































Отзывы:

Нет отзывов