Chrysler PACIFICA HYBRID 2019 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 244

Chrysler PACIFICA HYBRID 2019 Скачать руководство пользователя страница 45

WARNING!

must exercise care when using the steering
wheel heater. It may cause burns even at low
temperatures, especially if used for long peri-
ods.

• Do not place anything on the steering wheel

that insulates against heat, such as a blanket or
steering wheel covers of any type and mate-
rial. This may cause the steering wheel heater
to overheat.

MIRRORS

Power Folding Mirrors — If Equipped

The switch for the power folding mirrors is located
between the power mirror switches L (left) and R
(right). Push the switch once and the mirrors will
fold in, pushing the switch a second time will return
the mirrors to the normal driving position.

NOTE:

If the vehicle speed is greater than 10 mph
(16 km/h), the folding feature will be disabled.

If the mirrors are in the folded position, and vehicle
speed is equal or greater than 10 mph (16 km/h),
they will automatically unfold.

Resetting The Power Folding Outside Mirrors

You may need to reset the power folding mirrors if
the following occurs:

• The mirrors are accidentally blocked while folding.

• The mirrors are accidentally manually folded/

unfolded.

• The mirrors come out of the unfolded position.

• The mirrors shake and vibrate at normal driving

speeds.

To reset the power folding mirrors: fold and unfold
them by pushing the button (this may require mul-
tiple button pushes). This resets them to their nor-
mal position.

Power Folding Mirror Switch

43

«
...
43
44
45
46
47
...
»

Содержание PACIFICA HYBRID 2019





















































































































































































































































Отзывы:

Нет отзывов