Chrysler pacifica hybrid 2017 Скачать руководство пользователя

Страница: 271 / 604

Frequently Asked Question About Installing Child Restraints With Seat Belts

Frequently Asked Questions About Installing Child Restraints With Seat Belts

What is the weight limit (child’s

weight of the child restraint) for using the

Tether Anchor with the seat belt to attach a

forward facing child restraint?

Weight limit of the

Child Restraint

Always use the tether anchor when using the

seat belt to install a forward facing child re-

straint, up to the recommended weight limit

of the child restraint.

Can the rear-facing child restraint touch the

back of the front passenger seat?

Yes

Contact between the front passenger seat and

the child restraint is allowed, if the child re-

straint manufacturer also allows contact.

Can the head restraints be removed?

Yes

The 2nd row head restraints are removable.
The 3rd row center head restraint is remov-

able, but the 3rd row outboard head re-

straints are not removable.

Can the buckle stalk be twisted to tighten the

seat belt against the belt path of the child

restraint?

Do not twist the buckle stalk in a seating po-

sition with an ALR retractor.

NOTE:

If the folding, non-adjustable head restraint inter-

feres with the installation of the child restraint, the head
restraint may be folded and the child seat installed in front
of it.

SAFETY

269

Содержание pacifica hybrid 2017





























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание pacifica hybrid 2017

Отзывы:

Похожие инструкции для pacifica hybrid 2017

Бренды по названию

Популярные бренды

Chrysler pacifica hybrid 2017, Руководство пользователя

Результаты поиска

Содержание pacifica hybrid 2017

Отзывы:

Похожие инструкции для pacifica hybrid 2017

Бренды по названию

Популярные бренды