FCW monitors the information from the forward-
looking sensor, as well as the Electronic Brake Control-
ler (EBC) and wheel speed sensors, to calculate the
probability of a collision. When the system determines
that a collision is probable, a warning message (both
audible and visual) will be displayed within the cluster
display along with a brake jerk warning (previously
enabled in the Uconnect Settings). When the system
senses the driver applying the brakes to avoid a prob-
able collision, additional brake force will be provided
to the vehicle. When the system determines a collision
with the vehicle in front of you is no longer probable,
the warning message will be deactivated.
NOTE:
The FCW feature can be customized and turned off
through the Uconnect System touchscreen.
For further information, and applicable warnings and
cautions, please refer to the Owner’s Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Canadian
Residents).
LaneSense With Lane Keep
Assist — If Equipped
The LaneSense system uses a forward looking camera
to detect lane markings and measure vehicle position
within the lane boundaries. The LaneSense system is
operational at speeds above 37 mph (60 km/h) and
below 112 mph (180 km/h).
Turning LaneSense ON Or OFF
The LaneSense button is located on the
switch panel below the Uconnect dis-
play.
The LaneSense system will retain the last system state,
on or off, from the previous ignition cycle.
LaneSense Warning Message
The LaneSense system will indicate the current lane
drift condition through the instrument cluster display.
The visual warning depicted in the instrument cluster
display will vary depending on the unintentional lane
departure conditions, as described next.
The LaneSense indicator in the instrument cluster
display will be solid green when both lanes are de-
tected and the system is “armed” to provide visual and
torque warnings when the driver unintentionally drifts
out of the lane (no turn signal applied). When the
vehicle approaches a lane marker, the telltale will turn
solid yellow. The yellow telltale will begin flashing
yellow when the vehicle is crossing the lane marker.
The LaneSense system will also provide a haptic warn-
ing in the form of a torque applied to the steering
wheel to prompt the driver to remain within the lane
boundaries. The driver may manually override the
haptic warning by applying torque to the steering
wheel at any time.
When the LaneSense system is on but not armed, the
telltale in the instrument cluster display will be solid
white. This occurs when only the left, right, or neither
lane has been detected. If a single line is detected and
the driver unintentionally drifts across the detected
lane marking (no turn signal applied), the system is
ready to provide only visual warnings to prompt the
driver to remain within the lane. When only a single
lane marking is detected, a haptic (torque) warning
will not be provided and a visual warning will only be
provided for the detected lane.
Содержание PACIFICA 2019
Страница 1: ...2019 QUICK REFERENCE GUIDE CHRYSLER PACIFICA ...
Страница 23: ......