Chrysler PACIFICA 2019, Краткое руководство пользователя

Страница: 8 / 24

Modes of Operation
Additional camera modes can be selected when the
vehicle is in any gear and the surround view camera
system is activated by pressing the soft key located in
the “Controls” screen or the “Apps” screen in the
Uconnect system.
Deactivation
The system can be deactivated in the following con-
ditions:
• The speed of the vehicle reaches greater than
8 mph (13 km/h).
• The vehicle is out of REVERSE for greater than
10 seconds.
• The vehicle shifted into PARK.
• If the vehicle is in any gear other than REVERSE,
press the “X” button.
For further information, and applicable warnings and
cautions, please refer to the Owner’s Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Canadian
Residents).
Memory Seats — If Equipped
This feature allows the driver to store up to two differ-
ent memory profiles for easy recall through a memory
switch. Your vehicle is equipped with two key fobs.
One key fob can be linked to memory position 1 and
the other can be linked to memory position 2.
The memory positions can also be programmed to
recall the same positions when the unlock button is
pushed.
To Create A New Memory Profile
1. Cycle the vehicle’s ignition to the ON/RUN posi-
tion (Do not start the engine).
2. Adjust all memory profile settings to desired pref-
erences (i.e., seat, side mirror, power tilt and tele-
scopic steering column [if equipped], and radio
station presets).
3. Push and release the set (S) button on the memory
switch.
4. Within five seconds, push and release either of the
memory buttons (1) or (2). The instrument cluster
display will show which memory position has been
set.
NOTE:
Memory profiles can be set without the vehicle in
PARK, but the vehicle must be in PARK to recall a
memory profile.
Memory Seat Buttons
S E A T S