Chrysler PACIFICA 2019, Краткое руководство пользователя

Страница: 6 / 24

Enabling And Disabling ParkSense
ParkSense can be enabled and disabled
with the ParkSense switch, located on the
switch panel below the Uconnect display.
For further information, and applicable
warnings and cautions, please refer to the Owner’s
Manual
at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Canadian
Residents).
Parksense Active Park As-
sist System
The ParkSense Active Park Assist system is intended
to assist the driver during parallel and perpendicular
parking maneuvers by identifying a proper parking
space, providing audible/visual instructions, and con-
trolling the steering wheel. The ParkSense Active Park
Assist system is defined as “semi-automatic” since the
driver maintains control of the accelerator, gear selec-
tor and brakes. Depending on the driver's parking
maneuver selection, the ParkSense Active Park Assist
system is capable of maneuvering a vehicle into a
parallel or a perpendicular parking space on either side
(i.e., driver side or passenger side).
NOTE:
• The driver is always responsible for controlling the
vehicle, responsible for any surrounding objects,
and must intervene as required.
• The system is provided to assist the driver and not
to substitute the driver.
• During a semi-automatic maneuver, if the driver
touches the steering wheel after being instructed to
remove their hands from the steering wheel, the
system will cancel, and the driver will be required to
manually complete the parking maneuver.
• The system may not work in all conditions (e.g.
environmental conditions such as heavy rain, snow,
etc., or if searching for a parking space that has
surfaces that will absorb the ultrasonic sensor
waves).
• New vehicles from the dealership must have at least
30 miles (48 km) accumulated before the
ParkSense Active Park Assist system is fully cali-
brated and performs accurately. This is due to the
system’s dynamic vehicle calibration to improve the
performance of the feature. The system will also
continuously perform the dynamic vehicle calibra-
tion to account for differences such as over or
under inflated tires and new tires.
Enabling And Disabling The ParkSense Active
Park Assist System
The ParkSense Active Park Assist system can be en-
abled and disabled with the ParkSense Active Park
Assist switch, located on the switch panel below the
Uconnect display.
To enable the ParkSense Active Park
Assist system, push the ParkSense Ac-
tive Park Assist switch once (LED turns
on).
To disable the ParkSense Active Park Assist system,
push the ParkSense Active Park Assist switch again
(LED turns off).