Chrysler JOURNEY Скачать руководство пользователя страница 115

Страница: 115 / 408

JOBNAME: cims CHRY OM French

PAGE: 115 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 281CB107

/chry_pdm/chrysler/owners/jcd/og

•

Phonebook

(Downloaded

and

Uconnect™ Phone Local) name recog-
nition rate is optimized when the entries
are not similar.

•

You can say “O” (letter “O”) for “0”
(zero).

•

Even though international dialing for
most number combinations is sup-
ported, some shortcut dialing number
combinations may not be supported.

•

In a convertible vehicle, system perfor-
mance may be compromised with the
convertible top down.

Far End Audio Performance

•

Audio quality is maximized under:

•

low-to-medium blower setting,

•

low-to-medium vehicle speed,

•

low road noise,

•

smooth road surface,

•

fully closed windows,

•

dry weather conditions, and

•

operation from the driver’s seat.

•

Performance, such as audio clarity,
echo, and loudness to a large degree
rely on the phone and network, and not
the Uconnect™ Phone.

•

Echo at the far end can sometimes be
reduced by lowering the in-vehicle au-
dio volume.

•

In a convertible vehicle, system perfor-
mance may be compromised with the
convertible top down.

SMS

Uconnect™ Phone can read or send new
messages on your phone.

Your phone must support SMS over
Bluetooth

in order to use this feature. If

the Uconnect™ Phone determines your
phone is not compatible with SMS mes-
saging over Bluetooth

the “Messaging”

button will be greyed out and the feature
will not be available for use.

NOTE:

Uconnect™ Phone SMS is only

available when the vehicle is not in mov-
ing.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

115

Содержание JOURNEY

























































































































































































































































































































































































































Результаты поиска

Содержание JOURNEY

Отзывы:

Бренды по названию

Популярные бренды

Chrysler JOURNEY, Руководство пользователя

Результаты поиска

Содержание JOURNEY

Отзывы:

Бренды по названию

Популярные бренды