5.
Drill a ¼” hole in the dash, push the aux jack threated end
through the hole and tighten the nut (See Fig. 5
Fig. 5
Fig. 5
Fig. 5)
Fig. 5
Fig. 5
Fig. 5
Fig. 5
Warning!
Warning!
Warning!
Warning!
Should you decide on securing the jack, make sure the panel is at
least 1/8” thick for the threads on the jack to protrude and engage the nut.
(If necessary use a dremel to grind or thin the panel) Drilling a hole to
secure the jack is not necessary but doing so makes for a stock look and
easier to plug/unplug audio device.
Test Operation
Test Operation
Test Operation
Test Operation::::
1.
Turn the Radio “ON”
2.
Press the “MODE” button to enter Sirius or CD Changer
Mode
Note for Sirius
Sirius
Sirius
Sirius users
users
users
users: Most recent Sirius channel will play.
Note for CD Changer users
CD Changer users
CD Changer users
CD Changer users: Must have one or more CD’s
in Magazine
3.
Connect audio device to 3.5mm jack using the included 3 ft.
Audio cable or similar (See Fig. 6
Fig. 6
Fig. 6
Fig. 6).
4.
Locate a song on audio device and hit play Sirius /CD
Changer Playback.
Fig. 6
Fig. 6
Fig. 6
Fig. 6
3.5mm Male audio cable
5.
Use the radio volume control button to set the playback level.
To reduce distortion we recommended setting the audio
device volume level to 50% or less
Warning!
Warning!
Warning!
Warning!
Playlist and Track selection is *NOT* possible from the
Chrysler Radio. Use the audio devices built-in controls to access
audio files.
All manuals and user guides at all-guides.com
