Chrysler 300 Touring RWD 2010 Скачать руководство пользователя страница 311

Страница: 311 / 574

•

Mix Mode

Air comes from the floor, defrost and side

window demist outlets. This mode works best

in cold or snowy conditions.

12. Climate Control OFF Button

Press and release this button to turn the Climate Control

ON/OFF.

13. Driver Temperature Control Down Button

Provides the driver with independent temperature con-

trol. Push the button on the faceplate for cooler tempera-

ture settings or on the touchscreen, press and slide the

temperature bar button towards the blue arrow for cooler

temperature settings.

NOTE:

In Sync mode, this button will also automatically

adjust the passenger temperature setting at the same

time.

14. Driver Temperature Control Up Button

Provides the driver with independent temperature con-

trol. Push the button on the faceplate for warmer tem-

perature settings or on the touchscreen, press and slide

the temperature bar button towards the red arrow for

warmer temperature settings.

NOTE:

In Sync mode, this button will also automatically

adjust the passenger temperature setting at the same

time.

Climate Control Functions

A/C (Air Conditioning)

The Air Conditioning (A/C) button allows the operator

to manually activate or deactivate the air conditioning

system. When the air conditioning system is turned on,

cool dehumidified air will flow through the outlets into

the cabin. For improved fuel economy, press the A/C

button to turn off the air conditioning and manually

UNDERSTANDING YOUR INSTRUMENT PANEL 309

Содержание 300 Touring RWD 2010































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 300 Touring RWD 2010

Отзывы:

Бренды по названию

Популярные бренды

Chrysler 300 Touring RWD 2010, Руководство пользователя

Результаты поиска

Содержание 300 Touring RWD 2010

Отзывы:

Бренды по названию

Популярные бренды