Chrysler 300 Touring RWD 2010 Скачать руководство пользователя страница 18

Страница: 18 / 574

Replacement Keys

NOTE:

Only Key Fobs that are programmed to the

vehicle electronics can be used to start and operate the

vehicle. Once a Key Fob is programmed to a vehicle, it

cannot be programmed to any other vehicle.

CAUTION!

•

Always remove the Key Fobs from the vehicle and
lock all doors when leaving the vehicle unat-
tended.

•

For vehicles equipped with Keyless Enter-N-Go™,
always remember to place the ignition in the OFF
position.

NOTE:

Duplication of Key Fobs may be performed at an

authorized dealer. This procedure consists of program-

ming a blank Key Fob to the vehicle electronics. A blank

Key Fob is one that has never been programmed.

When having the Sentry Key® Immobilizer System serviced,

bring all vehicle keys with you to an authorized dealer.

Customer Key Programming

Programming Key Fobs or RKE transmitters may be

performed at an authorized dealer.

General Information

The Sentry Key® system complies with FCC rules part 15

and with RSS-210 of Industry Canada. Operation is

subject to the following conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference that may be

received, including interference that may cause unde-

sired operation.

NOTE:

Changes or modifications not expressly approved

by the party responsible for compliance could void the

user’s authority to operate the equipment.

16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание 300 Touring RWD 2010































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 300 Touring RWD 2010

Отзывы:

Бренды по названию

Популярные бренды

Chrysler 300 Touring RWD 2010, Руководство пользователя

Результаты поиска

Содержание 300 Touring RWD 2010

Отзывы:

Бренды по названию

Популярные бренды