Chrysler 300 Touring RWD 2010 Скачать руководство пользователя страница 282

Страница: 282 / 574

the touchscreen to close out of the settings screen. Press-

ing the Up or Down Arrow button on the right side of the

screen will allow you to toggle up or down through the

available settings.

Display

After pressing the “Display” button on the touchscreen

the following settings will be available:

•

Display Mode

When in this display you may select one of the auto

display settings. To change Mode status, press and re-

lease the “Manual” or “Auto” button on the touchscreen.

Then press the back arrow button on the touchscreen.

NOTE:

When Day or Night is selected for the Display

Mode, the usage of the Parade Mode feature will cause

the radio to activate the Display Brightness Day control

even though the headlights are on.

•

Display Brightness With Headlights ON

When in this display, you may select the brightness with

the headlights on. Adjust the brightness with the “+” and

“–” setting buttons on the touchscreen or by selecting any

point on the scale between the “+” and “–” buttons on the

touchscreen. Then press the back arrow button on the

touchscreen.

NOTE:

To make changes to the

Display Brightness with

Headlights ON

setting, the headlights must be on and

the interior dimmer switch must not be in the

party

parade

positions.

•

Display Brightness With Headlights OFF

When in this display, you may select the brightness with

the headlights off. Adjust the brightness with the “+” and

“–” setting buttons on the touchscreen or by selecting any

point on the scale between the “+” and “–” buttons on the

touchscreen. Then press the back arrow button on the

touchscreen.

280 UNDERSTANDING YOUR INSTRUMENT PANEL

Содержание 300 Touring RWD 2010































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 300 Touring RWD 2010

Отзывы:

Бренды по названию

Популярные бренды

Chrysler 300 Touring RWD 2010, Руководство пользователя

Результаты поиска

Содержание 300 Touring RWD 2010

Отзывы:

Бренды по названию

Популярные бренды