4. Within 5 seconds, press and release either
of the memory buttons (1) or (2). The Electronic
Vehicle Information Center (EVIC) will display
which memory position has been set.
NOTE:
•
Memory profiles can be set without the
vehicle in PARK, but the vehicle must be
in PARK to recall a memory profile.
•
The Recall Memory with Remote Linked to
Memory feature can be enabled through
the Uconnect® system screen. Refer to
“Customer- Programmable Features —
Uconnect® Access 8.4 Settings ” in “Un-
derstanding Your Instrument Panel” for
further information.
Linking And Unlinking The Remote
Keyless Entry Transmitter To
Memory
Your RKE transmitters can be programmed to
recall one of two pre-programmed memory pro-
files by pressing the UNLOCK button on the
RKE transmitter.
NOTE:
Before programming your RKE transmitters
you must select the “Memory To FOB” fea-
ture through the Uconnect® system screen.
Refer to “Customer- Programmable Fea-
tures — Uconnect® Access 8.4 Settings ” in
“Understanding Your Instrument Panel” for
further information.
To program your RKE transmitters, perform the
following:
1. Remove the Key Fob from the ignition (or
change the ignition to OFF, for vehicles equipped
with Keyless Enter-N-Go).
2. Select desired memory profile (1) or (2).
NOTE:
If a memory profile has not already been set,
refer to
ⴖ
Programming The Memory Feature
ⴖ
for instructions on how to set a memory
profile.
3. Once the profile has been recalled, press
and release the SET (S) button on the memory
switch, then press and release button (1) or (2)
accordingly. “Memory Profile Set” (1 or 2) will
display in the instrument cluster on vehicles
equipped with the EVIC.
4. Press and release the LOCK button on the
RKE transmitter within 10 seconds.
NOTE:
Your RKE transmitters can be unlinked to
your memory settings by following steps 1-4
above and pressing the UNLOCK button
(instead of LOCK) on the RKE transmitter in
Step 4.
Memory Position Recall
NOTE:
The vehicle must be in PARK to recall
memory positions. If a recall is attempted
when the vehicle is not in PARK, a message
will be displayed in the Electronic Vehicle
Information Center (EVIC).
85
PAGE POSITION: 87
JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_
1382968-en-2014_GRAND_CHEROKEE14WK742-126-ENG-AA/DIV_Owners_Manual_v1