Terra Manager
Terra User Manual
79
020-102838-10 Rev. 1 (05-2020)
Copyright
©
2020 Christie Digital Systems USA Inc. All rights reserved.
Configure Controller Settings
The Controller settings can be updated on the Global page.
The Terra Startup Assistant should be used to initially configure the Controller. Refer to
, page
1.
Navigate to the Global page.
2.
To update the settings, type new information in any of the editable fields.
3.
Click
Save Changes
.
Enable Controller Redundancy
To enable controller redundancy:
1.
Select the Enable Redundant Controllers check box on the Global page.
2.
Enter the IP address of the backup controller.
3.
Click
Save Changes
.
The controller exits Terra Manager and reboots to activate the changes.
Set a Network Time Protocol (NTP) Server
To enable NTP, click the
Enable NTP
check box.
When the Enable NTP check box is selected, the Time zone and Date and Time fields are unavailable
and are not used.
To assign a server to be used as the NTP server, enter the IP address or the server name in the NTP
Server IP Address field.
