Terra Manager
Terra User Manual
50
020-102838-10 Rev. 1 (05-2020)
Copyright
©
2020 Christie Digital Systems USA Inc. All rights reserved.
1.
Connect the desired audio input type (embedded on HDMI, or analog via 3.5 mm stereo mini-
jack connector).
2.
Select the transmitter(s).
Hint: You can multi-select (group-select) transmitters to configure more than one device.
3.
Select the input type from the drop-down menu to route the audio to the network switch and
to loopout to the transmitter analog port.
Audio input modes
None
Does not pass audio to the switch or loop-out to the analog audio
port.
2-Channel Analog Audio Passes audio from the 3.5 mm connected source.
HDMI with Analog
Loopout (default)
Passes the audio associated with the HDMI video to the
connected switch, and peels out (de-embeds) the 2-channel
analog to the 3.5 mm port on the transmitter. The analog audio
can be fed to a local DSP, audio receiver, amplifier, or speaker.
HDMI multichannel audio cannot be downmixed on the
transmitter loopout analog port.
4.
To save changes, click
Save
associated with the transmitter(s) or click
Save all
if multiple
transmitters are selected.
Changes to audio settings are made in real time.
Setting up Audio on the Receiver
Prior to setting up audio on Receivers, set up audio on the Transmitters.
1.
Connect the HDMI output to a display.
2.
Optionally, using a 3.5 mm stereo mini-jack cable, connect it to a DSP, Audio receiver,
amplifier, or speakers.
3.
Select the receiver(s).
Hint: You can multi-select (group-select) receivers to configure more than one device.
4.
Select the Audio Output Mode from the dropdown list.
