Christie Terra Скачать руководство пользователя страница 47

Страница: 47 / 106

Terra Manager

Terra User Manual

020-102838-10 Rev. 1 (05-2020)
Copyright

RX
Use to set the functionality of the external buttons on the Receivers.

COPY EDID

button

Send EDID

Sends the current EDID from the connected display to the selected

Transmitters (selected using Terra Manager/EDID tab).

DISABLED

Disables the COPY EDID button.

Blank (not

labeled)

button

Not functional. Reserved for future use. Currently not assigned to any feature.

LED Tab (TX and RX)

Use to set the functionally for the front panel LEDs on the Transmitters and Receivers.

LED0

N/A

Future use. Currently not assigned to any feature.

Blink

Blinks all LEDs.

Default function for

this LED

LEDs blink individually depending on the signal they are

receiving.

Hardware Tab (TX and RX)

Use to swap one device for another; or to delete a device that is no longer needed.

Swap

Devices

Swaps the selected device in the Devices list with the device selected on the

Hardware tab.

Delete

Original

Deletes the selected device in the Devices list when Swap is selected.

Delete

Device

Deletes the selected device in the Devices list.

XY-Index

Displays the current XY index for the device.
To change the index, enter a new index number and click

Save

. This number is

updated in the XY index column and in the web-based Terra XY Switcher.

Devices Setup Subpage



Hardware Tab (TX and RX): Delete a Device

When a device is discovered, Terra keeps track of it. If a device fails, is no longer needed, or is moved

from the Terra network, the device can be deleted.

To remove one or more devices from the list a devices:

Navigate to the

Devices

Setup

subpage.

Select the check box associated with one or more devices you want to delete.

Click the

Hardware

tab.

Click

Delete

and respond

to the confirmation dialog. The selected devices are deleted.

Devices Setup Tab



Firmware Tab (TX and RX)

Firmware updates may be available after updating the Terra Manager software. Firmware updates can

be selected from a list or from a file on the device running Terra Manager.
To update the firmware for a device:

On the

Devices Setup

subpage, select one of more or the same types of devices

(Transmitters or Receivers).

Содержание Terra







































































































Результаты поиска

Содержание Terra

Отзывы:

Похожие инструкции для Terra

Бренды по названию

Популярные бренды

Christie Terra, Руководство пользователя

Результаты поиска

Содержание Terra

Отзывы:

Похожие инструкции для Terra

Бренды по названию

Популярные бренды