Terra Manager
Terra User Manual
43
020-102838-10 Rev. 1 (05-2020)
Copyright
©
2020 Christie Digital Systems USA Inc. All rights reserved.
Click the device action menu associated with a device to:
•
Refresh the device
•
Reboot the device
•
Toggle the blink feature for the device
•
Reset device to factory settings (
requires re-entry of account password
)
•
Copy the device’s configuration
Devices Setup Subpage: Copy and Paste Configuration
Use the Copy Configuration and Paste Configuration features to copy the configuration of one device
to one or more like devices (a Transmitter configuration to other Transmitters and a Receiver
configuration to other Receivers). The configuration parameters include:
•
Analog audio including any downmixed HDMI stream.
•
HDMI Audio.
•
The direction of stream from the analog port (input or output).
•
HDCP status either 2.2 or 1.4.
•
Behavior of the Switch and Copy EDID buttons.
•
LED behavior for all LEDs on the TX and RX.
•
RS232 (UART) settings including baud rate, data bits, stop bits, and parity.
To copy a configuration:
1.
Navigate to the
Device Setup
subpage.
2.
Click the source device you want to copy the configuration from.
The tabs on the bottom of the page are available.
3.
Click the Device Action menu associated with the device.
4.
Click
Copy Configuration.
